Disposable Surgical Mask level2

The bottom and top layers are made of polypropylene spunbond non-woven fabric, with polypropylene electrostatic meltblown non-woven fabric in the middle by heat lamination.

Products Details



1st ply: 25g/m2 spun-bond PP

2nd ply: 25g/m2 melt-blown PP (filter)

3rd ply: 25g/m2 spun-bond PP


 CE, ISO 13485, EN14683, ASTM Level 2

 Ply Type



 Tie-on / earloop


 Blue/ white/ green/ yellow/ black/ pink…


High BFE/PFE, Adjustable nose piece, Elastic earloop

【Caution】 1. This product is a sterile ear-mounted medical surgical mask, see the instructions for use before use. 2. This product is a single-use product, repeated use is prohibited. 3. Sterile products are sterilized with ethylene oxide. The maximum use time is 8 hours, please destroy after use. 4. The product should be used as soon as possible after opening. 5. Do not use products whose packaging has been damaged. 6. If stored improperly, it is forbidden to use within the expiration date if it is moldy or deteriorated. 7. If breakage, fracture or other accidents occur when using, the product should be replaced immediately. 8. If dizziness, nausea, breathing difficulties, etc. occur when using the product, please replace the product immediately. 9. The mask should not be worn for too long, any skin irritation reaction should be removed immediately. 10. Choose a suitable size mask according to your face size.Scope of application This product is worn by clinical staff during invasive procedures to provide protection for patients undergoing treatment and medical staff performing invasive procedures to stop the spread of blood, body fluids and splashes.[Instructions for use] 1. You should choose a suitable size mask according to your own face size. 2. Wearing method: a. Fold and extend the mask; b. Hang the mask strap to the ear, put on the mask, wear it comfortably, and lightly press the nose clip to make it tight to the face; c. Adjust the mask so that it can cover the nose and mouth to the jaw. 3. Before wearing, please confirm the front and back of the mask, the dark color is the front and the white is the back. The front side should face outward, the back side is facing the face, and the part with the nose strip should be above when wearing, don't wear it backwards. 4. Please avoid hand contact with the reverse side (inner side) of the mask before wearing.
Standard class Bacteria filtration efficiency (BFE) Breathing resistance (mmH2O/cm2) Splash resistance (mmHg) Particulate filtration efficiency(PFE)
EN14683  Type I  >98%  <3.0  N/A   N/A
 Type IR  >98%  <5.0  120   N/A
 Type II  >99%  <3.0  N/A  >98%
 Type IIR  >99%  <5.0  120/160  >98%

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours